Three things go wrong when people buy a bidet sprayer online, and all three start in the same place: the listing tells you less than the photo implies.
The short version
- Price does not tell you the material. One NTL plastic set in this range is $57.00. One NTL brass set is $61.00. Four dollars apart.
- "Bidet sprayer" is not a fixed scope of supply. Some listings name a hose, some name a valve, some name neither.
- The angle valve is often a separate purchase, and its price moves more on finish than on function.
Prices below were pulled live from the catalogue on 25 August 2026 and can change.
Mistake 1: treating price as a stand-in for material
NTL is the one vendor in this collection that prints a standalone Material line on every listing, so its range is the clearest place to see the problem.
| Model | Colour stated | Material stated | Price |
|---|---|---|---|
| QNTL-P302-A | Chrome | Plastic | $24.00 |
| QNTL-P303-A | Chrome | Plastic | $24.00 |
| QNTL-P303-B | White | Plastic | $24.00 |
| QNTL-P303-C | Black | Plastic | $24.00 |
| QNTL-P903 GM | Gun Metal | Plastic | $57.00 |
| QNTL-P306A | Chrome | Brass | $61.00 |
| QNTL-P304A | Chrome | Brass | $66.00 |
| QNTL-P305A-1 | Chrome | Brass | $67.00 |
| QNTL-P304-1 | Brush Nickel | Brass | $74.00 |
| QNTL-P306B | Black | Brass | $74.00 |
| QNTL-P304B | Black | Brass | $79.00 |
Live NTL plastic sets run $24.00 to $57.00. Live NTL brass sets run $61.00 to $79.00.
The two ends of that are easy. The middle is where people get caught. QNTL-P903 GM is plastic at $57.00. The QNTL-P306A Hand-held Sprayer Set is brass at $61.00. Four dollars between them, and a $33.00 gap between that plastic set and the plastic sets at $24.00. A price near the top of the range is not evidence of brass.
Where the material is actually written
Five vendors, four different habits. Reading a spec sheet across vendors who each disclose a different amount is the same job as comparing instant shower heaters on power and IP rating, where the figure you want may be printed under a label you did not search for.
| Vendor | Where material appears | What it looks like |
|---|---|---|
| NTL | Its own Material line | Material : Brass |
| G.Ferretti | Inside the Finished line | Finished : Brass Chrome / Finished : ABS Chrome |
| NOBEL | Inside a prose feature bullet | 304 Stainless Steel Black finish |
| Aalto | Not stated on the spray sets | Spray Set Finished : Chrome |
| VERA | Not stated | Type: Bidet Spray Set Finish: Chrome Polish |
G.Ferretti is the one that costs people money, because the material sits in a field most buyers read as a colour. GO-63 A GF is $15.30 and its finish line reads ABS Chrome. ABS is plastic. GO-56 GF is $63.00 and reads Brass Chrome. Both are titled as bidet sprayers, both describe a sprayer with a holder, both are chrome. One costs four times the other.
There is a third state on the same range. GO-41 A GF, GO-42 A GF and GO-43 A GF all read Brass /ABS Chrome, at $23.63 to $24.75. Part brass, part plastic, stated plainly, and invisible if you only skim for the word brass.
Read the finish line on every listing. On this catalogue the title and the URL disagree with it often enough that neither one is safe to trust.
Mistake 2: assuming "bidet sprayer" means a complete set
Four listings, four different scopes of supply, and three of them sit inside a $3.00 spread.
| Model | What the listing calls it | Parts named | Price |
|---|---|---|---|
| NBS-79-SS | Bidet Spray with Angle Valve | Sprayer, telephone spring hose, 2-way stop valve | $60.00 |
| QNTL-P306A | Hand-held Bidet Sprayer Set with Hose | Sprayer, hose | $61.00 |
| GO-12 GF | Bidet Sprayer with Holder | Sprayer, holder | $63.00 |
| VVA.2012J-BN | Bidet Spray Set (Valve, Hose, Spray Gun, Holder) | All four, named individually | $114.00 |
Same model, two listings, two levels of detail. VVA.2012J-BN spells out valve, hose, spray gun and holder. VA.2012J-C, the chrome finish of the same VA.2012J model at $90.00, states only model, type, finish and brand.
One live listing in the whole collection states a hose length, ATPC010GM at 1.2m. Everywhere else, the length is a question to settle before you order.
Mistake 3: forgetting the valve, then forgetting what finish does to it
If the listing does not name a valve, price one in.
| Model | Finish | Price |
|---|---|---|
| AT1344 | Chrome | $27.75 |
| AT1344G | Gold | $62.25 |
| AT1344MG | Matte Gold | $62.25 |
| AT1344RG | Rose Gold | $62.25 |
| AT1344GM | Gun Metal | $62.25 |
| AT1344MRG | Matte Rose Gold | $62.25 |
| AT1344B | Matte Black | $75.00 |
Same valve, 2.7 times from bottom to top, and the matte black one costs more on its own than the $61.00 brass QNTL-P306A set costs complete.
The sister range does not behave the same way. AT2344, also a single-lever mini valve, runs $27.00 in matte black to $33.75 in matte silver. Finish barely moves it. So "budget a bit for the valve" is not usable advice. Budget for the valve in the finish you actually want. The same pattern shows up elsewhere in the catalogue, and it is worth reading what actually drives a kitchen sink tap's price before assuming a finish premium is fixed.
When plastic is the right answer
A $24.00 plastic set in a second toilet used twice a week is a reasonable purchase, and the $15.30 ABS G.Ferretti is reasonable for the same reason. Plastic sprayers work.
Buy plastic on purpose and you have made a sensible decision. The two ways to lose money here are paying a brass price for plastic, and buying what you took for brass off a listing that never said brass.
The four-line check before you order
- Find the material. Its own line on NTL, inside the finish line on G.Ferretti, inside the feature bullets on NOBEL. If none of those appear, the material is not stated.
- Count what is named. Sprayer, holder, hose, valve, taken off the description and not off the photo.
- Price the valve separately if the listing does not name one, in the finish you want.
- Ask about hose length if it is not stated.
A bidet sprayer taps off the same supply as the toilet, so if you are ordering both together it is worth checking your toilet's roughing-in in the same sitting.
Common questions
Is a brass bidet sprayer worth paying more for than a plastic one?
It depends on how hard the sprayer gets used. A $24.00 plastic set in a second toilet used twice a week is a reasonable buy. The cost to avoid is paying a brass price for a plastic set: on ThatRenoStore's live NTL range, plastic sets run $24.00 to $57.00 and brass sets run $61.00 to $79.00, so a $57.00 plastic set sits only $4.00 below the cheapest brass one.
Does a bidet sprayer come with an angle valve?
Only if the listing says so. In this collection, NBS-79-SS names a 2-way stop valve and VVA.2012J-BN names a valve, hose, spray gun and holder. The NTL and G.Ferretti listings name a hose or a holder and no valve. Count the parts off the description, not off the photo.
How much does an angle valve cost on its own?
On the live Aalto range, an AT1344 mini valve is $27.75 in chrome and $75.00 in matte black, so finish moves the price 2.7 times. The AT2344 mini valve runs $27.00 to $33.75 across its finishes. Price the valve in the finish you actually want.
How do you tell plastic from brass in a bidet sprayer photo?
You cannot. A chrome-plated plastic sprayer and a chrome-plated brass sprayer photograph the same way. The material is only in the text: NTL prints a Material line, G.Ferretti puts it inside the Finished line as Brass Chrome, ABS Chrome or Brass /ABS Chrome, NOBEL puts it in a feature bullet, and the Aalto and VERA spray sets do not state it at all.
Do bidet sprayers have a WELS rating?
No listing in ThatRenoStore's bidet collection publishes a WELS rating, so there is no tick rating to compare across these 88 products.
Shop the range
88 bidet sprayers, spray sets, angle valves and seat covers, with the material and the parts list on each listing where the vendor states them. Shop bidet sprays at ThatRenoStore.